Availability: | |
---|---|
Quantity: | |
XM-BA381
XIMI
Dissolve barium chloride dihydrate in hot water, heat the mixture of sulfuric acid and water, and then slowly add it. Place it for a moment, add a few drops of dilute sulfuric acid to the supernatant and check whether the precipitation is complete. Stand still and wash the precipitate with hot water for 5 ~ 6 times by decantation method. Then use a Buchner funnel to suck and filter, wash and dry. Grind the dried product into fine to obtain pure barium sulfate.
SPECIFICATION | ||
Apperance | White Powder | |
D50 (μm) | max | 3.3 |
BaSO4 content (%) | 92 | |
Volatile matter (105℃) | max | 0.2 |
Whiteness (%) | min | 92 |
Oil Absorption g/100g | 13~15 | |
Ph Value | 7±0.5 | |
Specific Gravity g/cm3 | 41 | |
Water Soluble Matters (%) | max | 0.06 |
Refraction Index | 1.64 | |
Iron Fe (%) | max | 0.003 |
Electrical Conductivity (Us/cm) | max | 150 |
Dissolve barium chloride dihydrate in hot water, heat the mixture of sulfuric acid and water, and then slowly add it. Place it for a moment, add a few drops of dilute sulfuric acid to the supernatant and check whether the precipitation is complete. Stand still and wash the precipitate with hot water for 5 ~ 6 times by decantation method. Then use a Buchner funnel to suck and filter, wash and dry. Grind the dried product into fine to obtain pure barium sulfate.
SPECIFICATION | ||
Apperance | White Powder | |
D50 (μm) | max | 3.3 |
BaSO4 content (%) | 92 | |
Volatile matter (105℃) | max | 0.2 |
Whiteness (%) | min | 92 |
Oil Absorption g/100g | 13~15 | |
Ph Value | 7±0.5 | |
Specific Gravity g/cm3 | 41 | |
Water Soluble Matters (%) | max | 0.06 |
Refraction Index | 1.64 | |
Iron Fe (%) | max | 0.003 |
Electrical Conductivity (Us/cm) | max | 150 |